DIY garden house: classic of timber + non-standard according to Finnish technology

Pin
Send
Share
Send

Nowadays, most people in the warm season want to live in nature. Breathing clean air, temporarily getting rid of the atmosphere of a noisy smoky metropolis and constant stresses is the dream of many citizens. Some years have been collecting the necessary amount for the construction of a capital house in the country. But in order to move to nature, it is not at all necessary to wait for when the right amount of money will be collected from you. A garden house may turn out to be a comfortable temporary housing, it will not take a lot of time to build it, it will cost inexpensively and it will be very pleasant to live in it in the summer. Do it yourself with a do-it-yourself garden house, you need to choose the right project, material, determine the price.

The budget version of the garden house can be built from timber or using Finnish frame-panel technology. These are buildings of the same type, only during the construction of a timber house it is sheathed with timber (profiled or simple), and the frame house is sheathed with chipboard, plywood or fiberboard.

Garden houses using Finnish technology are good solutions for a summer cottage. A light foundation does not require a massive foundation, the frame is quickly sheathed with finishing material.

Frame plywood garden house

It takes less time to build such a house than a timber one, because large sheets of plywood, which are used for cladding, fasten to the frame much faster than the bars. Such a house can be built even in a week, and it will look presentable, especially if wood paneling is used for lining.

A beautiful garden house made of plywood - decorative chimney trim, brightly painted walls, openwork porch and a roof made of shingles. A house can look aesthetically pleasing and without wooden sheathing

Scheme of a frame country house with paneling from chipboard

Stages of construction:

  • Installation of foundation supports.
  • Construction of the frame: work on the upper and lower casing, the construction of vertical supports and rafters. For the installation of doors and windows, contours are formed using additional bars.
  • To create a draft version of the floor, thick boards are used - with a thickness of 20 cm or more.
  • The outer skin of the frame is plywood; self-tapping screws are used for fastening. Drywall, plywood, fiberboard or chipboard are used for the inner lining. Nights in the spring and even in the summer are sometimes quite cool, so it is advisable to insulate the house. For this, a layer of mineral-cotton insulation can be laid between the skin layers.
  • Installation of a clean floor - floorboard or linoleum.
  • Trim plywood. The plywood is then coated with a layer of drying oil and roofing felt.

For your house to be beautiful, it requires an outer lining of solid material. For example, siding or wooden lining. The windows in the country house can be installed both plastic and wooden, this is a matter of taste. But plastic is easier to clean, and such windows will last longer.

You can build a garden house with your own hands from a beam. This is the most commonly used material for country houses. The beam looks aesthetically pleasing, and the construction of this material can last a long time. In construction, you can use a simple and profiled beam. In the latter case, the assembly of the house resembles a designer, because the connection of elements occurs due to the groove-ridge system. Today, a lot of companies offer country houses from profiled timber, all the elements of such a house are already ready, they only need to be assembled.

Another original solution to the housing problem in the country is a motor home. Read more about this in the material: //diz-cafe.com/postroiki/dom-na-kolesax-dlya-dachi-kak-bystro-i-deshevo-reshit-problemu-komforta.html

Construction of a garden house made of timber

First of all, as usual, we make the foundation. It can be either columnar or tape. The column foundation is suitable if the size of the house is small. Concrete slabs can also be used for the foundation, they are laid on a well-compacted layer of sand, buried in the ground by about 15 centimeters. After the foundation is erected, a waterproofing layer should be laid on it, roofing material is suitable.

After the foundation is done, the frame is installed. The crown and logs (lower harness made of timber) are laid on the foundation supports, then vertical supports made of the same material are installed.

The frame of a garden house made of timber is erected in a short time, while the construction is quite solid and durable.

If you like a garden house with a veranda, the lower logs are extended to its expected length, mounted on additional supports. Thick boards are used to create the floor, as in the above version.

Interesting ideas for decorating the veranda: //diz-cafe.com/dekor/dizajn-verandy-na-dache.html

After installing the floor, we collect the walls from the timber. Nails are used for fastening the joints, after a layer of sealant a new crown is laid out on the finished row. A sealant is needed for each layer, you can use jute or tow.

Then we equip the roof. Installation of braces and rafters from timber. The next stage is lining with timber and laying a layer of roofing material. After that - the final work on the floor. The wooden floor is covered with thermal insulation (mineral wool layer). As a hydro and vapor barrier, you can use glassine. As a flooring in a country house, thick linoleum or a floorboard is suitable.

The house will look very attractive if the outside of the bars are sheathed with siding or wooden lining. Now you can proceed to the installation of windows and doors and think about how you want to see the interior of your summer cottage.

Interior design of a garden building

The interior of the garden house made of timber is good in itself - the walls and floors sheathed with wood look excellent, so that the design of the garden house inside can be done in a minimalist style - necessary furniture, a minimum of accessories, the general background is wooden paneling.

The interior of the garden house in a minimalist style. Walls, floor and ceiling - wood paneling, a minimum of furniture and decor in the form of green plants and a pair of paintings

The tree goes well with natural stone, so from sandstone you can make a countertop, lay out part of the wall. On the veranda in combination with wood, forging elements will harmoniously look.

The veranda of a garden house made of timber, which perfectly combines wood, wrought iron lamps and natural stone, which lined the wall, table and roaster

The rustic style is also suitable for designing a garden house inside - use a patchwork, checkered fabrics and curtains, pottery, rough wooden furniture, dry bouquets if you like country style.

Also, material on the country style in the country will be useful: //diz-cafe.com/plan/sad-i-dacha-v-stile-kantri.html

If the house is sheathed with plywood or drywall from the inside, the dwelling can be given an urban look - to wallpaper the walls or paint, to lay the floor with a carpet.

Urban-style garden house interior, 2 in 1, bedroom and study

Layout examples of garden houses

The plan of the garden house should be simple - this is the construction of a small area, usually with one, maximum two living rooms, a kitchen, a small bathroom, an entrance / pantry and a veranda, if it is provided for by the layout.

Pin
Send
Share
Send