Floral arrangements can transform any garden plot. Colorful flower beds, delighting the eye with a riot of colors and exuding a charming aroma, do not leave anyone indifferent. But if elegant floral compositions are given an unusual shape, then they will become a bright decoration of the territory in front of the house, giving the site uniqueness and originality. You can create unusual flower beds from any improvised materials: it’s enough to show a little imagination, and the old unsightly thing will become the original frame for the flower arrangement.
Nominee # 1 - miniature flower beds in containers
When deciding to arrange flower beds, placing them in improvised containers or framing with decorative borders, you can solve two problems in parallel: create original decor elements, protect plants, protecting them from encroachments of domestic animals, and also prevent them from "creeping" across the territory. The main thing to remember is that, wanting to create original flower beds, you can take almost any material as a basis.
Funny containers made from old clothes, rubber balls and old-time plumbing will help transform the look of the garden.
You can even break a miniature flower garden, which will become an ornament of the front zone on the site or the playground, in old shoes. The larger the shoe will be, the wider the selection of plants for its design.
Turning an old shoe into an impromptu flower pot is quite simple: you need to drill it at the junction with the sole for arranging drainage, and then fill it with a fertile mixture and plant flowers
The advantage of such a container is its mobility: it is convenient to place the shoe on the porch, steps, fence, introducing colorful paints into the interior. Among the shortcomings, only the need for daily watering and weekly dressing of plants should be highlighted.
Interesting ideas and jewelry for giving with your own hands from unnecessary things can be found here: //diz-cafe.com/dekor/idei-dlya-dachi-svoimi-rukami.html
Nominee # 2 - plywood flowerbed umbrella
To equip a no less attractive, but more durable flower garden, you can build a flowerbed-umbrella from plywood.
A pretty flowerbed can even be obtained from an old umbrella, which was stuck in the ground and filled with fertile soil for planting flowering plants
To make such an original flower garden you will need:
- 9 wooden blocks with a cross section of 4 cm for the needles of an umbrella;
- 1 longer wooden block for arranging the handle of the umbrella;
- 10 triangular cuts of plywood, the height of which corresponds to the length of the spokes;
- screws or nails.
Triangular parts from plywood and the "spokes" of the umbrella are assembled by connecting with nails or self-tapping screws. The wider the triangular blanks, the more voluminous and roomy the flower bed will be.
The finished structure is installed with the sharp cut end down to the ground, deepening it by 10 cm, and additionally fixing it with pegs for stability. The bottom of the flower bed is filled with a layer of rubble, on top of which a fertile soil composition is lined. In the center of the composition set the "handle" of the umbrella. A successful combination of colors on the flowerbed is given by: drought-resistant salvia, unpretentious marigolds and colorful beauties of aster.
As a result, a peculiar cone should be obtained, from which it is necessary to saw off a sharp tip with a diameter of 15 cm, necessary for arranging drainage
Nominee # 3 - motley "flower brook"
It is not always possible to allocate a significant territory to a site under a flower bed. But even in the absence of the opportunity to "turn around", you can create a beautiful and unusual composition, when you look at it the mood rises.
A miniature plant composition "spilled flower pot" can even transform an unsightly corner into an elegant lawn, where it is pleasant to relax, admiring the beauty of flowers
The basis for creating an unusual flowerbed can be any old container: a cracked clay pot or jug, a glass bottle with a wide neck, an aluminum can or a plastic container.
You can also make a beautiful flowerbed from a barrel. 5 manufacturing methods: //diz-cafe.com/dekor/klumba-bochka.html
To design such a flower garden, it is better to use low-growing and ground cover plants with flowers of blue-blue and white shades, which from afar resemble spilled milk or water from afar
To equip the tank, you need to remove a 15-20 cm layer of soil, so that the tank is placed at an angle of 30-40 °, and its bottom is located slightly above the neck. A little soil is poured into the neck of the container and seedlings are planted, gradually planting bushes and distributing them in the form of a winding path resembling the contours of a brook.
Compact lobelia bushes, pansies and delicate daisies are perfect here. A combination of colors on a flowerbed created from a mixture of varieties will look spectacular. The choice of plants is limited only by the location of the "flower brook": when arranging it in a corner of the garden, it is better to choose shade-tolerant varieties, and placing it on sunny glades, preference can be given to sun-loving beauties.
Also in such flower beds limantes looks good. Read about it: //diz-cafe.com/rastenija/limnantes-vyirashhivanie-iz-semyan.html
Nominee # 4 - wooden flower bed palette
Complex at first glance, the design is quite simple to manufacture. For its arrangement it is necessary to prepare:
- Styrofoam or plywood sheet;
- Wooden blocks for construction legs;
- Manual mill on the contour;
- Varnish or paint for woodwork.
On one palette, 6 to 8 flower pots can freely fit. The diameter of the holes should correspond to the size of the pots placed on the palette. Holes are cut through the intended contour using a cutter.
A spectacular decoration of the site will be an unusual container flower garden, designed in the form of a palette
The diameter of the palette depends on the size of the flower pots, which will play the role of colorful paints. Having determined the size of the structure, they outline the locations of the holes under the tank
To increase the strength of the palette, the structure is strengthened by applying a round gasket from a cut of the same plywood to the center of the composition
Since the structure will be installed at a slight angle, two support legs are attached to the back of the palette.
The original container flower garden is almost ready. To give it a more decorative look and extend its life, the outside and back of the palette are coated with colorless varnish or any other wood-like paint
You can decorate the composition with any flowering plants. The composition will give bright colors: picky nasturtiums, delicate viols and fragrant petunias. A rake and a shovel - the tools of an artist who paints his garden with flowers will complement the composition.
Nominee # 5 - compositions from the old transport
Owners of a service vehicle that has expired, which it cannot be thrown out, can arrange larger-scale compositions on the site. With the light hand of a creative owner, new life is gained: broken bicycles, motorcycles, boats and even cars.
It is very simple to turn an old bicycle into an original mobile flower garden: you need to attach spacious pots to the front, rear racks and the frame of the structure
To make the vertical flower garden more attractive, it is advisable to paint the containers and the frame of the structure in one color scheme.
The easiest way is to build more decorative flowerpots from an old boat: you just need to firmly fix it on the ground, fill it with soil and plant your favorite flowers
Advice! To equip such an impromptu flowerbed, it is better to allocate a well-visible place on the open lawn.
By the same principle, a flower garden is built from an old car. Before planting a car with plants, it is necessary to get rid of all unnecessary parts: unscrew the engine, remove the seats, release the trunk and hood.
Useful: how to equip a playground for children from improvised materials //diz-cafe.com/ideas/kak-obustroit-igrovuyu-ploshhadku-dlya-detej.html
Making out a flower garden, it is better to use plants in containers. Thanks to this, the composition can always be updated, replacing faded specimens with varieties that are just entering the flowering season.
You can place containers in the trunk or in the passenger compartment, or fix them on the roof of the car so that as the flowers grow, they braid the car body with a continuous carpet
Over time, an unusual machine woven from a living carpet with flowers will become a bright accent of the site.
